How to remove paint from cedar siding

23.03.2021 By Sarr

how to remove paint from cedar siding

Painting and Stripping Old Wood Siding — Overview

Work your scraper from the top of each shingle toward the bottom, in steady, even strokes with the grain of the wood. Hold both blades of the scraper against the wood firmly, but don't press so hard that it gouges. For tough areas, scrape lightly several times rather than trying to scrape heaily once. Get all the loose paint off. Sep 30,  · Best way to remove exterior paint quickly from red cedar siding using the 'Dustless Blaster'.

When we started to paint our house, we faced the problem of trying to decide what we could do to maximize the life of our paint job. Unfortunately, we kept finding contradictory information. Should we use a latex primer or and alkyd primer? Should we use a water repellent sealer before priming? Should we how to lock a filing cabinet scrape or totally remove the old paint? Here is a summary of what we did.

For full details. Go to our step-by-step page. Tip : Have the paint store tint the primer to the same color as the top coat. The National Park Service recommends it as do some other top painters. We decided to use a sealer because our area is humid and gets regular rain during the Spring and Summer. Therefore, we wanted to seal the fresh stripped wood surface as soon as possible after using the infrared heat stripper. The process of infrared heat stripping dries out the wood and allows the sealer to readily how to remove paint from cedar siding. We applied the sealer, which cleans up with water, as small areas were stripped.

Since the freshly striped siding was now protected, we could wait to prime larger areas on dry days, and by priming larger areas with the alkyd primer, we were more productive in priming setup sising clean up. Why is my paint peeling. Proper siding preparation. Repairing old windows. Repairing old windows National Park Service.

Exterior ti problems on historic woodwork National Park Service. Painting pressure treated wood. Removing mildew from surfaces —Wet and Forget Commercial Product. Smith and Co's MultiWoodPrime epoxy primer.

Help support this site. Link to Amazon from here. Peeling paint from moisture. Too many layers of old paint. Note the metal overhang on the window. This was caulked on the sides and the old metal overhang pried sidinb a bit so the water wouldn't wick. Painting and Stripping Old Wood Siding — Overview When we started to paint our house, we faced now problem of trying to decide what we could do to maximize the life of our paint job. Go to our step-by-step page Strip the old paint Go to our paint stripping page We decided to strip the paint to give us the best chance of producing the longest lasting paint job.

Be sure to remove any caulk where the siding overlaps as how to do system link on xbox 360 houses need to breathe.

Pull out loose nails and renail using stainless steel siding nails. Fill any dents and holes with either a wood or epoxy filler. Sand the surface. Apply an epoxy consolidant to soft wood and coat the rest with a wood preservative. Caulk cracks. Never caulk between the overlapping siding boards as this traps in moisture which will cause peeling. Apply one coat primer. Behr paints have been mentioned as a top paint in various consumer studies for many years.

We use Consumer Reports as our guide to paints. We are now using semigloss paint as it stays cleaner; however, some people removve not like the glossy look. How to remove paint from cedar siding Never caulk between the overlapping siding boards. This traps in moisture. Moisture needs to flow between the inside and outside so your house can breath.

Don't caulk unpainted wood. Caulk after using the sealer. If you don't use the sealer, caulk after priming. Wood that is gray or weathered will not hold paint.

Sand down paont fresh wood. Unfinished siding exposed to several weeks of sunlight before painting needs to be sanded. Sunlight degrades the unfinished wood surface, thus it will never hold paint as well as fresh wood.

If the unfinished wood was exposed more than 3 to 4 weeks, lightly sand the surface to remove the thin layer of degraded wood before applying paint. Don't let the primer sit more than a few weeks before painting. Soap-like compounds can form on oil primers in as little as two weeks. Use a brush when painting old siding.

It rremove the paint to be worked into the siding's imperfections more effectively than a roller or spray. Don't prime or paint in direct sunshine, when it is dry and breezy, or is very hot over 90 degrees F Paint should not be applied when the air temperature is below when the air temperature is below the stated hwo for the product, nor if the temperature is forecasted to drop below that minimum during the next 36 hours, nor if the surface being painted is below that temperature.

Oil-based paints should be applied when the temperature is at least 40 F; for latex paints, the temperature should be at least 50 F. Conditions should remain above these temperatures for 24 hours after painting. When pretreating the wood with a paintable water-repellent preservative a recommended practicebest results are achieved if it is applied when temperatures are greater than 70 F.

When water-based paints cure, the water should evaporate as fast or faster than the solvents. After the water has evaporated, the paint will shrink to nearly its final shape. As the solvents evaporate, the paint chemically reacts to form a hard material. When it is too humid, water cannot evaporate and the solvents may evaporate first, causing the paint to cure while still in a water-filled state. You cannot recover from this type of disaster.

Oil-based paints how to go from dark hair to blonde also fail if conditions cdear too humid. Help support this site Search Link to Amazon from here.

Help support this site Search.

Begin scraping off the mixture of paste and paint using the paint scraper. If the stripping compound has enough time to finish its work, it will prove easy to pull the paint away from the cedar. Jun 10,  · This is an up to date video on how to strip cedar siding. It shows you the proper techniques to strip cedar siding to prepare for stain. Please go to our w. Sep 04,  · If you pressure wash it hard enough to remove the paint, it will fuzz up some. I recently did some similar cedar shakes that had peeling Sikkens on them. I did a 'medium' pressure washing (2, [email protected] inches) then used a wire brush to knock some of the fuzz off. Only made vertical strokes with the wire brush, to prevent cross grain scratches.

While paint provides durable and long-lasting protection for wood siding, many homeowners prefer the rich, natural appearance of stained wood as an alternative -- especially when the timber offers the rustic aesthetics of cedar.

Stripping all the paint from cedar that was previously painted can be a tedious chore, but using an N-Methylpyrrolidone, or NMP, chemical stripper simplifies the process. Once the paint has been removed, the siding can readily accept a semi-transparent stain that will accentuate the cedar's natural color and prevent it from graying.

Spread drop cloths on the ground and over foliage to protect plant life from any chemical damage. Spread an NMP-based paint removing paste onto the siding, using a disposable paint brush. Take care to get the paste into any nooks and crannies. Climb a ladder to reach any higher portions of the exterior wall that are out of your reach. Allow the paint removing paste at least two hours to work. If the siding is covered with more than four coats of old paint, give the NMP paste at least four hours to penetrate through all the paint layers to the wood.

Begin scraping off the mixture of paste and paint using the paint scraper. If the stripping compound has enough time to finish its work, it will prove easy to pull the paint away from the cedar siding. If necessary, use the wire brush to remove the paint and paste mixture that is stuck inside any fine crevices.

Wash down the siding with a low-power pressure washer -- between 1, and 1, psi. Let the cedar dry thoroughly for one to two days before moving on to the next step. Apply the semi-transparent stain using an angled brush, also known as a sash brush.

As before, use a ladder to access hard-to-reach areas. Most stains provide ample coverage in a single coat, but some require two or more coats. Read the manufacturer's instructions for details. Mike Matthews is editor of Green Building Product News, a national publication that covers sustainable innovations in building and remodeling, and he has spoken at national conferences on green building.

He has also served as founding editor of "Paint Dealer" magazine. By Mike Matthews. Related Articles. NMP-based strippers often contain a co-solvent ingredient such as d-Limonene, dibasic ester, or soy methyl ester. Some NMP paint removers feature a color-change indicator that tells you when the stripping action is complete. NMP-based strippers perform best in outdoor temperatures between 60 and 80 degrees Fahrenheit.

Exterior stains are best applied when the temperature falls between 50 and 90 degrees Fahrenheit. Check the manufacturer's label for specific instructions.

Apply the stripping paste on a day when no rain is expected for at least 24 hours. The stain should also be applied when no rain is expected for 24 or more hours. If a pressure washer is unavailable, a garden-hose with the nozzle set at car-washing force may serve as an acceptable alternative. Semi-transparent stains are available in dozens of colors. Some stain suppliers offer sample kits that let you try out individual colors on a small portion of your siding to help make your color decision easier.

Oil-based wood stains penetrate the cedar and harden the top surface of the wood. Water-based wood stains form a thin film over the surface and raise the cedar's grain. The typical water based stain also releases fewer pollutants into the air during application. Semi-transparent stains can also be applied using other applicator types -- read the stain manufacturer's instructions for specific details. Select an un-pigmented paint stripper. Some brightly-colored chemical paint strippers discolor the wood and must be bleached out of the wood after use.